What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 11:17
He then describes Rainy Season and Lightning.
What does a fuse do?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
But it can get overloaded, and no longer works.
Chris Conley announces his retirement - NBC Sports
This is where the MOV conducts again, and dissipated the energy.
Now when you have a certain ac resistance, then a current flows in a loop.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
In schematic diagrams this is the symbol for a fuse:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What are some effective strategies for getting more upvotes on Quora?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
A circuit breaker is similar, but is resettable.
but this device (an Inductor) … impedes the rapid changes in the current.
Smoking Weed and Eating Edibles Share This Surprising Health Risk - Gizmodo
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This device then solves the entire problem.
the problem then depends on "how fast does the fuse operate?".
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The other is “what does a “fuse” do?”
At least they know the answer if they wanted it.
This is 'the assistant's answer'
2024–10–16 [ OO OLAOYE OYEBODE ]
It seems Mohan does not understand the difference between a comment and an Answer.
What is lightning?
One
Upvotes:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Why don't I want to talk to my girlfriend when she loves me a lot? I feel bored.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
At one ohm, the resistor has a maximum of 1 watt power.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
He then describes the function of a fuse.
but I think this circuit , shows a few more pieces.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
For this case there are devices called Metal oxide varistors (MOV).
so, what happens?
I post the exact comment here.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It also is a device that limits the change in current flow.
a photo is worth a thousand words.
The third is lightning and “how it gets conducted into a home.”
This one hit behind the barn.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There are two important concepts here.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But… the neutral is now “floating” because of the 1 ohm resistance.
what exactly is a ‘surge’ protector?
These are simplified answers to the original question, and does not change anything I wrote above.
First Sentence:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
nine
Barnstars:
An AC voltage/ current source, and an ac inductive load.
This is where this question deviates from being a 'generic' question, and becomes more specific.
The bolt then partially travels down the line to your home.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
(Dc diagram shown, AC is similar).
[image of Common-mode choke]
These devices are installed between the “hot” and “neutral” and protective ground.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
eight
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–14 [Omar Gharbi Omar Gharbi ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–10[John johnson John Johnson ]
[old diagram got deleted by accident]
Edit 2024–10.
Because the load is inductive, the current lags the voltage.(by a bit).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
One is “what exactly is in a ‘surge protector’ ? ”
There are three different concepts here that are getting confused.
A fuse is a non-resetable over current circuit protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
He then asserts :